How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask fixer2013 Your Own Question
fixer2013
fixer2013, Handyperson
Category: Home Improvement
Satisfied Customers: 82
Experience:  I am able to supply most answers for DIY projects, as I have many years experience
74591549
Type Your Home Improvement Question Here...
fixer2013 is online now

I am replacing a mira alora shower with a mira sprint. The

Customer Question

I am replacing a mira alora shower with a mira sprint. The sprint water inlet is plastic. Do I use a regular compression fixing to join the two pipes. Should there be an anti crushing device on the plastic inlet pipe.
Michael Blake
Submitted: 3 years ago.
Category: Home Improvement
Expert:  fixer2013 replied 3 years ago.
Hello Micheal My name is Ivor I hope I can help you.

I have had this problem with plastic fixings, I got over it by using a flexi fitting with a push fit end onto the plastic and a compression end to the copper pipe, you can get these at B& Q etc. both in 15mm and 22 mm sizes.

I hope this helps you
Kind regards
Expert:  fixer2013 replied 3 years ago.
Hello again Micheal
I am just enquiring if you were successful getting the part for the shower piping

Thank you for using Just Answer.
If we can be of help in the future, just post your question.

Kind regards