How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Aric Your Own Question
Aric
Aric, Technician
Category: Home Cinema System
Satisfied Customers: 44442
Experience:  15+ years in the field. Owner of AV Installation, OEM and Repair company
24739752
Type Your Home Cinema System Question Here...
Aric is online now

My Denon RCD-M39DAB has decided that there is no service on

Resolved Question:

My Denon RCD-M39DAB has decided that there is no service on Dab Radio. CD is fine.
I have disconnected and reconnected the antenna but it did not help.
Submitted: 1 year ago.
Category: Home Cinema System
Expert:  Aric replied 1 year ago.
Hello and sorry you're having problems. Please disconnect the Denon from power, then plug it back in, while simultaneously pressing "<<" and "Source" on the front of the receiver. "Initialize" should then be displayed. This clears any glitches within the micro-processor that may be causing this. Let me know what happens. If you need further assistance let me know. Please do not forget to click a POSITIVE RATING before you go- as it's how I am credited for my work. You can follow up at any time, at no additional cost.
Aric and 2 other Home Cinema System Specialists are ready to help you
Expert:  Aric replied 1 year ago.
Did you have any luck?
Customer: replied 1 year ago.

Hi Aric,

No luck yet. I unplug, Replug switch on while pressing dot and arrow.

If dot is a moment before arrow, it changes function. Otherwise it goes on Dab search and then no service. I did it about 10 times.

Expert:  Aric replied 1 year ago.
Hi, Are you sure you're pressing "Source" along with the <<?
Expert:  Aric replied 1 year ago.
These steps are outlined on page 23 of the manual below- please take a look and double check the steps: http://www2.crutchfield.com.edgesuite.net/pix.crutchfield.com/ImageBank/v20120815112100/Manuals/033/033DM39S.PDF
Customer: replied 1 year ago.

The Manual you have given me does not support DAB.

Yes I am pressing source (dot) and << (arrow).

On my Manual RCD-M39DAB page 18

1 press setup during DAB reception

2 Use ^ v to select Tuner Setup, then press enter or >

3 use ^ or v to select DAB autoscan then press enter or>

4 Press enter. This unit searches for receivable Dab stations

No it doesn't

Customer: replied 1 year ago.

I got my wife to help me and we plugged it in and pressed the buttons and it now works.

Related Home Cinema System Questions