How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Matt Your Own Question
Matt
Matt, Mechanical Engineer
Category: Jaguar
Satisfied Customers: 22173
Experience:  BEng hons Mech engineering, in auto industry 22 years
12772297
Type Your Jaguar Question Here...
Matt is online now

I have 2004 S type diesel. The park brake is giving a fault

Customer Question

I have 2004 S type diesel. The park brake is giving a fault and the car beeps continuously when driven. The right brake lamp failed first. This sequence has happened before. Your advice would be appreciated.

Many thanks,

Niall
Submitted: 4 years ago.
Category: Jaguar
Expert:  Matt replied 4 years ago.
Hello

there's a reset procedure for the brake which is

1
a. Switch off the ignition.
b. Disconnect the battery for 30 seconds.
c. Reconnect the battery.
2. Start the engine.
3. Firmly apply and release the footbrake five times.
4. Confirm that the message NOT CALIBRATED or APPLY FOOT AND PARK
BRAKE is displayed on the instrument cluster message center. This indicates that
the parking brake is in calibration mode.
5. Lightly press the footbrake pedal.
6. Apply the parking brake by using the EPB switch.
7. Release the parking brake.
8. Release the footbrake.
9. Confirm that the brake warning lamp is no longer illuminated on the instrument
pack and that the NOT CALIBRATED message is no longer displayed in the
message center.
10. Apply and release the EPB five times to ensure no error is present.

If this doens't work then its possible that the brake electric motor may need replacing I'm afraid