How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask indy-tech Your Own Question
indy-tech
indy-tech, Import tech
Category: Mazda
Satisfied Customers: 7065
Experience:  Import technician.
29331485
Type Your Mazda Question Here...
indy-tech is online now

Vibration at tickover idle through drivers seat and seat

Customer Question

Vibration at tickover idle through drivers seat and seat behind drivers seat . Changed 3 x engine mounts , fitted new spark plugs, injectors checks all air hoses checked , auxiliary belts and tensioners OK, diagnostics (plug in ) shows no faults. All exhaust hangers present and ok. Happens when revs hit just below 750 . Any ideas ?
Submitted: 1 year ago.
Category: Mazda
Expert:  indy-tech replied 1 year ago.

Year ,Make ,Model, Engine

Miles on engine .

manual or automatic .

Greg

Customer: replied 1 year ago.
2007 mazda6 ts2 2.0 petrol auto ,
73,000 miles
Expert:  indy-tech replied 1 year ago.

Okay good thank you .

When yoiu put the car into "D" does the vibration get better or worst .

Greg

Customer: replied 1 year ago.
Slightly worse
Expert:  indy-tech replied 1 year ago.

Okay do you know which mounts where replaced .like theb rear mount engine and firewall side .

Greg

Customer: replied 1 year ago.
Rear , drivers side and passenger side engine mounts
Expert:  indy-tech replied 1 year ago.

Okay that what i was thinking as this type of vibration is front or rear mount i suggest you go ahead and replace the other two .

Still need additional information then please get back to me with the reply button, and not the poor or bad service, this way i can get back to you or suggest another expert if needed.

Your deposit does not pay me until the answer is rated in a positive way,
A bad rating does not constitute a refund.

If you are not happy or you have sorted out your problem before the answer then please let me know with the reply button .

Kind regards Greg.

Customer: replied 1 year ago.
What other two ? There are only three engine mounts and they have been all been changed
Expert:  indy-tech replied 1 year ago.

The dog bone type mount was that replaced .

Greg

Customer: replied 1 year ago.
it was
Expert:  indy-tech replied 1 year ago.

The mounts will have to be rechecked , this is a mount problem .

Was the car ever in an accident .

You need to get the car on a lift with someone in the drivers seat and run the engine and with the foot brake on select a gear and check where the engine is coming into contact with the chassis .

Greg

Customer: replied 1 year ago.
Mounts have been checked by an expert and he says they are fine ?
Expert:  indy-tech replied 1 year ago.

Okay .

I will opt out and see if another expert can assist you .

Rgds Greg

Related Mazda Questions