How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Matt Your Own Question

Matt
Matt, Mechanical Engineer
Category: Mercedes
Satisfied Customers: 20617
Experience:  BEng hons Mech engineering, in auto industry 22 years
12772297
Type Your Mercedes Question Here...
Matt is online now

Hi I have an A Class 06 petrol 1.7 It has now lost power twice

Customer Question

Hi I have an A Class 06 petrol 1.7
It has now lost power twice and the sign for the fuel injection shows
If I stop and restart it is ok for several days then may happen again
Local garage computer shows a probable cause but not what it actually is
Any ideas please
Submitted: 2 years ago.
Category: Mercedes
Expert:  Matt replied 2 years ago.

Hello


This sounds like an electrical actuator or sensor at fault .Usually when you can cycle the ignition key on / off and then restart the engine and the fault is gone temporarily this indicates that this is an electrical component causing this issue.

This could be a wiring issue as things tend to expand when hot and its possible a poor or partial electrical connection is being pushed apart on one of the major sensors so check the connection plug and wiring to the following;

Airflow meter

Crank position sensor

Cam position sensor

O2 sensor

Throttle position sensor

Also worth checking the connections to the fuel pump for the same reason - unplug each in turn and give them a good squirt of switch / contact cleaner - Not WD40

and also unplug and inspect the main power relays and fuses for signs of overheating or corroded terminals - so the ones for the ECU and the fuel pump

And also unplug the wiring loom connections in the engine bay one at time and inspect for corroded or recessed pins.

Also replace the spark plugs if any of them fail this checklist:

http://www.ngksparkplugs.com/tech_support/spark_plugs/faqs/faqread.asp

Also its worth checking that the electric pump that feeds the injectors is working correctly, it should run for a few seconds then switch off when you first turn the ignition on. If the connections to this are corroded or damaged then the pump could stop at any time. Check that its relay switches in and out and the relay contacts are clean and bright – replace the relay if in any doubt and do the same for the fuse, ideally measure the voltage at the pump and check its getting 12V

What Customers are Saying:

 
 
 
  • 9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much. Phil
< Previous | Next >
  • 9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much. Phil
  • Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible. Charles
  • As a single woman, I really appreciate an excellent and affordable opinion.
    Thank you Geordie, I will not hesitate to contact justanswer in the future!
    Sue
  • Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff. Jim
  • I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry. Stephanie P
  • Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help. Mary C.
  • This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!! Alex
 
 
 

Meet The Experts:

 
 
 
  • Matt

    Matt

    Mechanical Engineer

    Satisfied Customers:

    482
    BEng hons Mech engineering, in auto industry 22 years
< Last | Next >
  • http://ww2.justanswer.com/uploads/35/350matt/2012-6-7_182356_matsavatr.64x64.jpg Matt's Avatar

    Matt

    Mechanical Engineer

    Satisfied Customers:

    482
    BEng hons Mech engineering, in auto industry 22 years
  • http://ww2.justanswer.com/uploads/EU/eurotec/2012-6-11_13153_mpjaphoto.64x64.JPG Marty's Avatar

    Marty

    ASE Certified Technician

    Satisfied Customers:

    21372
    Bosch Certified Master Technician with over 35 years experience in the automotive industry.
  • http://ww2.justanswer.com/uploads/MI/mikeamechanic/2013-4-2_175558_photo.64x64.JPG mike_a_mechanic's Avatar

    mike_a_mechanic

    Mercedes Mechanic

    Satisfied Customers:

    116
    17 years experience as a auto mechanic, foreign and domestic.5 years running my own repair business.
  • http://ww2.justanswer.com/uploads/MB/MBpaul/2013-8-21_204936_paul.64x64.jpg MB Paul's Avatar

    MB Paul

    Mercedes Technician

    Satisfied Customers:

    212
    Mercedes Benz Qualified Diagnostic Technician
  • http://ww2.justanswer.com/uploads/IN/indytech/2013-8-8_102717_SantoDomingo146598x6402.64x64.jpg Greg's Avatar

    Greg

    Technician

    Satisfied Customers:

    1080
    Automotive diagnostic tech
  • http://ww2.justanswer.com/uploads/TE/techmachine/0601821347169_717372168_8940977_39623330_o.64x64.jpg Ross's Avatar

    Ross

    Diagnostic and repair technician

    Satisfied Customers:

    453
    Licensed diagnostic and repair technician