How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jake Your Own Question
Jake
Jake, Nissan Technician
Category: Nissan
Satisfied Customers: 229
Experience:  Experienced collision repair technician, Pulaski Tech graduate and DSM hobbyist.
20440119
Type Your Nissan Question Here...
Jake is online now

2005 2.2 dci xtrail, engine warning light on, bosch test equipment

Customer Question

2005 2.2 dci xtrail, engine warning light on, bosch test equipment indicate, crank or cam sensor, replaced both and reset, comes back on and engine idles very rough, independant garage had oscilloscope on it and thought possible wiring fault as square wave form on both have slight glitch in exactly same place, but could not get wiring diagram to follow up with, any clues.?

Nigel
Submitted: 4 years ago.
Category: Nissan
Expert:  Shantal-Mod replied 4 years ago.

Hello,

I've been working hard to find a Professional to assist you with your question, but sometimes finding the right Professional can take a little longer than expected.

I wonder whether you're ok with continuing to wait for an answer. If you are, please let me know and I will continue my search. If not, feel free to let me know and I will cancel this question for you.

Thank you!

Shantal
Customer: replied 4 years ago.

I will continue to wait a little longer


 


Thanks


Nigel


 

Expert:  Shantal-Mod replied 4 years ago.

Hello Nigel,

We will continue to look for a Professional to assist you.


Thank you for your patience,

Shantal

Expert:  indy-tech replied 4 years ago.
Hi .

Could you get me the codes that where gathered .

Post them here for me to check out for you .

Rgds Greg
Customer: replied 4 years ago.

Codes at bosch agent indicated crank sensor, I am unable at moment to confirm actual codes, I will try and get them. Both crank and cam sensor have been replaced. Prior to changing sensors, one time when low fuel light came on then engine warning light went out and idle was smooth, I tried to replicate this next time on low fuel but the warning light remained on

Expert:  indy-tech replied 4 years ago.
Okay will wait for the codes ,

Greg