How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jake Your Own Question
Jake
Jake, Nissan Technician
Category: Nissan
Satisfied Customers: 4001
Experience:  Experienced collision repair technician, Pulaski Tech graduate and DSM hobbyist.
20440119
Type Your Nissan Question Here...
Jake is online now

I have just changed the engine of a Nissan quashqai 1.5

Resolved Question:

Hi I have just changed the engine of a Nissan quashqai 1.5 diesel year 2011 drives fine when on idle its lumpy no fault codes does the ecu need to be programmed
Submitted: 2 years ago.
Category: Nissan
Expert:  Jake replied 2 years ago.
Hey there, if you replaced the engine you should have the control valve on the pump calibrated and the idle volume relearn procedure completed with the dealer scan tool. Expect to pay one hour of labor for these procedures to be done.
Jake and other Nissan Specialists are ready to help you
Customer: replied 2 years ago.
Is this main dealer only or can snap on tool do it thank you
Expert:  Jake replied 2 years ago.
Most snap on scan tools can also do this, yes!
Expert:  Jake replied 2 years ago.
I have never personally used the snap on tool, but I know they can do them as I know others who have.
Customer: replied 2 years ago.
Will try again tomorrow thank you
Expert:  Jake replied 2 years ago.
Your welcome let me know if you need anything else.
Customer: replied 2 years ago.
Ok thank you