How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Robert Your Own Question
Robert
Robert, Peugeot Technician
Category: Peugeot
Satisfied Customers: 4623
Experience:  Fully qualified 19+yrs exp/self employed technician in the UK
13210289
Type Your Peugeot Question Here...
Robert is online now

an anti pollution message has flashed up and then stop too

Resolved Question:

an anti pollution message has flashed up and then stop too low on a 307
Submitted: 3 years ago.
Category: Peugeot
Expert:  Robert replied 3 years ago.

Hi..sorry for the delay

 

Hopefully i can help

 

What engine do you have exactly?

 

Whats is recent service and repair history/mileage etc?

 

Any engine issues that you've noticed since this warning flagged up?

Customer: replied 3 years ago.
It's a 1.4 75,0000 miles no service history
Expert:  Robert replied 3 years ago.

Hi..there thanks for you reply..

 

Ok..the antipollution is just a generic fault warning that and coincide with the engine management means the car ecu has detected the fault - ideally the next stage you have to take on this is as any garage would do this first is to get it scanned for the relevent faults to be able to track exactly whats at fault here as this warning can cover a a huge area of possible faults aswell as codes..so as you'll understand the diagnostic route will have to the first step then see exactly what the codes are and take it from there - the most common in regards XXXXX XXXXX fault if i asume its petrol is usually an intake fault bad maf sensor / missfire fault bad sparkplugs or coils or a fault in with the catalyst "catalytic converter" either failed or oxygen lambda sensors on the exhaust can all have knock on effect in but those are usually the most common but without knowing the exact fault codes your cars logged it hard to say it just an easy fix with replacement sensor or not....however ensure that all fluids are upto proper levels inc oil/coolant etc - but as above the best step you need to take now is to get the car scanned and see what currently logged as per faults codes and that should help pin point exactly whats at fault and possible costs..I do hope this helps- if you need to ask anything else or inc lude any further info then just continue before you rate..

Robert and other Peugeot Specialists are ready to help you