How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andrew Smith Your Own Question
Andrew Smith
Andrew Smith, Plumber
Category: Plumbing
Satisfied Customers: 3633
Experience:  City and Guilds qualified plumber
46681511
Type Your Plumbing Question Here...
Andrew Smith is online now

Biasi combo red light flashing and no hot water or heating.

Resolved Question:

Hi, biasi combo red light flashing and no hot water or heating. Please help.
Submitted: 1 year ago.
Category: Plumbing
Expert:  Andrew Smith replied 1 year ago.
What is the pressure gauge reading?Does it attempt to start when you reset the boiler?
Customer: replied 1 year ago.
Pressure gauge reads 1.6 bar and yes tries to start but clicks and red light flashes.
Customer: replied 1 year ago.
Could you shed any light on problem and what to do. Have 2 children under 4 and need it fixed.
Expert:  Andrew Smith replied 1 year ago.
It sounds like it is just failing to light, you will probably find a service will cure this fault.Back to normal call out rates tomorrow.
Customer: replied 1 year ago.
I know its failing to light. Is your 'just answer' get a service?!
Expert:  Andrew Smith replied 1 year ago.
No, if you are Gas Safe registered and have the ability and tools to do this yourself then I will gladly guide you through it.
Customer: replied 1 year ago.
Ok thanks. I'm not registered or remotely qualified. I will call someone out.
Expert:  Andrew Smith replied 1 year ago.
Ok, come back if you or the engineer gets stuck
Andrew Smith and other Plumbing Specialists are ready to help you