How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JamesI Your Own Question
JamesI
JamesI, Electrician
Category: Pool and Spa
Satisfied Customers: 1591
Experience:  James has 7 years expereince managing and support pool plant equipmant for swimming pools.
75967336
Type Your Pool and Spa Question Here...
JamesI is online now

Filled balboa for first time in 6 months. Switched it on,

Customer Question

Filled balboa for first time in 6 months. Switched it on, the puns were working then a few hours later ever thing switched off. Control panel had nothing on display. What is the problem
Submitted: 6 months ago.
Category: Pool and Spa
Expert:  JamesI replied 6 months ago.

Hi Gary whats the make and model of the Balboa spa?

It sounds like you have a short, start by checking the breaker.

Customer: replied 6 months ago.
There's 240v to the GS spa control system
Expert:  JamesI replied 6 months ago.

Where are you checking the 240V, is this on the PCU within the spa?

Are you getting power on the other side of the relay within the control panel?

Customer: replied 6 months ago.
I've got 240v on both sides of the main 30A fuse
Expert:  JamesI replied 6 months ago.

Are you getting anything across the 3A, 2mA and 10A fuses, and checked non of them have blown?

Customer: replied 6 months ago.
The 2mA fuse has blown & when I replaced it has blown again. When does this feed
Expert:  JamesI replied 6 months ago.

The 200mA fuse protects the transformer for the control panel.

It suggests either you have a faulty transformer or a fault with the control panel.

Customer: replied 6 months ago.
Thank you for your help. We have a hot tub technician coming out this week
Expert:  JamesI replied 6 months ago.

No problem, do let me know if I can be of any further assistance, my guess would be its a new PCB.

JamesI and other Pool and Spa Specialists are ready to help you
Customer: replied 5 months ago.
Hi James, it was the pcb.ive put a new spa control system in & on the control pad shown in added files just shows numbers. I've put a jumper across J43 & waited for Pr to show but no change. Do you know what's up