Printer Repair Questions? Ask IT Technicians for Answers ASAP
This is Nathan.
For clearing this error you will need to enter in the service mode and clean absorber's count.
To enter in SERVICE MODE1) Power off Printer2) Push and hold "Resume" button and then push and hold "Power" button3) Hold the Power button, then release and 2 times press Resume button4) Led indicators must change5) Release all buttons6) Then printer in Service Mode
To clean absorber counter, 7) Press "Resume" Button 4 Times and after press Power button. It's all! Your absorber count is EMPTY!
DO NOT press Resume 3 times and POWER. It will reset some EEPROM data settings
If the error persists then reply for further assistance. Thanks. Cheers XXXXX XXXXX a nice day.
Hi Nathan I tried what you told me and it dose not work.still says"absorber nearly full press ok and contact service centre.jim.
Then you need to replace the absorber. Buy a new one and replace it as the error still remained after performing the above steps.