How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Richard Your Own Question
Richard
Richard, Engineer
Category: Printers
Satisfied Customers: 40171
Experience:  15 years consulting in the IT industry with Printing engineering
32989067
Type Your Printers Question Here...
Richard is online now

The printing from my SCX-3405 shows a downward slope of about

Resolved Question:

The printing from my SCX-3405 shows a downward slope of about 2mm. Any easy ways to fix it ?
Submitted: 3 years ago.
Category: Printers
Expert:  Richard replied 3 years ago.
Thank you for your question, my name is XXXXX XXXXX I look forward to assisting you.

Please note, click on Reply to Expert to reply to me, a rating is only needed when we are finished.

To clarify, you mean the margin on the paper becomes narrower by 2 mm down the page?

Thank you
Customer: replied 3 years ago.

Yes I suppose so, I would probably describe it as starting out on the left margin but as it moves it becomes about 2mm off horizontal _


_


_ yes, so as you say margin becomes narrower

Expert:  Richard replied 3 years ago.
Thank you Hazel

Where the pages are in the printer, there is a slide on one side to align them

Can you make sure this is pushed in as far against the paper as it will go.

Then do a test print and tell me if you still have the problem please.

Richard and other Printers Specialists are ready to help you
Customer: replied 3 years ago.

It seems to work on the page that is up. Fingers crossed.


I am a gubbins ! Thanks.

Expert:  Richard replied 3 years ago.
Your welcome!

Was just the slide alignment that was the problem Hazel, always make sure it is pushed correctly in.

If you would like any additional information or assistance, please do not hesitate to let me know.

And if you can take a second to rate my service, that would be greatly appreciated.

Thank you
Richard and other Printers Specialists are ready to help you