How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask nathan_mills Your Own Question
nathan_mills
nathan_mills, Technician
Category: Printers
Satisfied Customers: 640
Experience:  Efficient Technician with more than 30 years of Experience.
76814648
Type Your Printers Question Here...
nathan_mills is online now

Canonprinter MG5450 support code on screen B200 says needs

Customer Question

canonprinter MG5450 support code on screen B200 says needs repair ideas please
Submitted: 10 months ago.
Category: Printers
Expert:  nathan_mills replied 10 months ago.

Hi Peter. Welcome to justanswer.

Error B200 means the print head voltage or temperature is not normal. The Print head could be defective.... but first, try these solutions below (as in some case this is a false error)

· Turn off the power

· Open the front panel

· Now turn on the power

· The cartridges will start moving towards right first and then left. When the print head is still moving and is going to the very LEFT (after it reaches middle and is about to reach extreme left), close the cover

· Now check if the error is still there?

Try this 3-4 times

Expert:  nathan_mills replied 10 months ago.

What is the status Peter?

Expert:  nathan_mills replied 10 months ago.

Hi Peter, How did things turn out?

Related Printers Questions