How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Richard Your Own Question
Richard
Richard, Engineer
Category: Recorders and Players
Satisfied Customers: 38587
Experience:  Electronics Engineer
32989067
Type Your Recorders and Players Question Here...
Richard is online now

I have a DMR-EX95VEBS and it has just died. According to my

Resolved Question:

I have a DMR-EX95VEBS and it has just died. According to my wife it just said Please, Please, Please as it went. I'm guessing it is the power board that has gone as there is no sign of life. I have tested the mains cable fuse and the power board fuse and they are both OK. Either, is it possible to buy a board or can you locate an engineer/repair service in the TA24 6AZ area of the UK? Thanks, John
Submitted: 3 years ago.
Category: Recorders and Players
Expert:  Richard replied 3 years ago.
Thank you for your question, my name is XXXXX XXXXX I look forward to assisting you.

Please note, click on Reply to Expert to reply to me, a rating is only needed when we are finished.

The boards are not sold seperatly, but first, look on the board for the capacitor C1808

Check and tell me please if it has vented.

Customer: replied 3 years ago.

Hi Richard, Thanks for the reply. I am familiar with a capacitor but how will I tell if it has vented? John

Expert:  Richard replied 3 years ago.
Look for any bulges or splits in it.

Like it has exploded, even slightly.

Customer: replied 3 years ago.

I have checked and found that C1204 displays these symptoms.

Expert:  Richard replied 3 years ago.
Ok, this is the problem.

Can you solder John? Meaning do you know how to remove the Capacitor and attach a replacement?

Customer: replied 3 years ago.


Yes. Did some electronics when I was young and still have my iron and solder.


 


It may be a little time to source the capacitor.


 


Thanks for your help so far.

Expert:  Richard replied 3 years ago.
Yes, you need a 6.3V 680µF capcitator,

I use this site generally.

Click me to view

Once replaced, it will work again John

If you would like any additional information or assistance, please do not hesitate to let me know.

And if you can take a second to rate my service, that would be greatly appreciated.

Thank you

Richard and other Recorders and Players Specialists are ready to help you