How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Richard Your Own Question
Richard
Richard, Engineer
Category: Recorders and Players
Satisfied Customers: 40189
Experience:  Electronics Engineer
32989067
Type Your Recorders and Players Question Here...
Richard is online now

i bought a panasonic bd 700 player with code free instructions.

Customer Question

i bought a panasonic bd 700 player with code free instructions. i have read them several times but am unable to change codes. is the player supposed to be turned on. if on ,at what exact moment do i press the keys on my remote. please explain.
thank you
Submitted: 2 years ago.
Category: Recorders and Players
Expert:  Richard replied 2 years ago.
Thank you question, my name is ***** ***** I look forward to assisting you.
Please note, click on Reply to Expert to reply to me, a rating is only needed when we are finished.
The player will need to be on.
The codes change though due to DVD batches. Can you tell me the code free instructions you have please?
Thank you
Richard and other Recorders and Players Specialists are ready to help you
Customer: replied 2 years ago.

it says 2708 (then if you want to see bd zone a you add another 1, together with dvd region 1 you add another 1) .

so i have to press 270811 to see US videos.

zone and region must always be the same.

however i do all this but european codes (wich is where i live) just remain.

thank you.

Expert:  Richard replied 2 years ago.
Where did you purchase it from?
Customer: replied 2 years ago.

i purchased it from britain.

Expert:  Richard replied 2 years ago.
Thank you, ***** ***** where in Britain, from which shop
Customer: replied 2 years ago.

a shop called the perfect signal on ebay .the player which is the top panasonic bd player,was bought brand new.

Expert:  Richard replied 2 years ago.
Thank you
You are doing this with the device turn on correct?
And does the player respond at all when you enter the code?
Customer: replied 2 years ago.

nothing at all

thank you

Expert:  Richard replied 2 years ago.
ok, remove the power from the power socket minutes.
Then plug the power back in and turn it on.
Then attempt to enter the code and tell me if it now responds please.
Customer: replied 2 years ago.

i am afraid not.

Expert:  Richard replied 2 years ago.
ok, I dont believe then you have a player that can be unlocked, as it is not responding at all to any of these commands, and it should at least respond.
Contact the shop and have them confirm they gave you the correct commands firmware.
Let me know the results please