How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Robert Your Own Question
Robert
Robert, Renault Technician
Category: Renault
Satisfied Customers: 85
Experience:  Fully qualified 19+yrs exp/self employed technician in the UK
13210289
Type Your Renault Question Here...
Robert is online now

renault scenic 2 2003 1.5dci , timing belt snapped so full

Customer Question

renault scenic 2 2003 1.5dci , timing belt snapped so full belt kit etc cylinder head rebuilt , bloody thing wont start just turns over and over , good pump pressure fuel primed, new cam crank sensor , 2x glow plugs replaced as open circuit, relays good , no damage or corrosion or damp etc inside fuse board / relays, timing perfect i have full timing pin set and have rechecked twice including fuel pump timing , cam pulley new( snapped collet) , and cylinder compression test good around 24/25 bar on each cylinder ( done on a cold engine due to non start ) will run on a touch of easy start but cuts out when stopped. tested injector wires with an led tester has no power when cranking , but can trigger each one individually with delphi scanner and they do trigger once , also no fault codes coming up at all , any ideas ? only thing i could think of was possibly the inertia sensor triggered when belt snapped but there are no fault codes to show this . what else have i missed or is it likely be that is causing the fault?

Submitted: 2 years ago.
Category: Renault