How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Small Engine
Satisfied Customers: 28122
Experience:  Service manager and technician for all brands of engines with 40 + years of experience.
Type Your Small Engine Question Here...
Curtis B. is online now

With all connections made and the trigger pulled I get a on

Customer Question

With all connections made and the trigger pulled I get a on /off, on /off spurt from the lance until the lance is adjusted to "Min"
Submitted: 2 years ago.
Category: Small Engine
Expert:  Curtis B. replied 2 years ago.
Check the inlet hose connection, it should have a screen it it , to keep trash and bugs out. See if the screen is clean. It starves the pump for water and will give erratic pump pressure.
Customer: replied 2 years ago.

I have now done this and the screen was clear. I even tried without the screen.

Still no success

Expert:  Curtis B. replied 2 years ago.
OK, do you have parts list? Look at your spill valve/ unloader valve. It may be sticking. will need to be removed and lubed.

Related Small Engine Questions