How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask spankyjr1 Your Own Question
spankyjr1
spankyjr1, Small Engine Technician
Category: Small Engine
Satisfied Customers: 2602
Experience:  Journeyman TechnicianWorked on small to large engines for 30 yearsGas,LP,Diesel
65057319
Type Your Small Engine Question Here...
spankyjr1 is online now

I've got a de Walt ads drill breaker 110v and it will only

Customer Question

I've got a de Walt ads drill breaker 110v and it will only run for a couple of seconds in breaker mode then I need to release and re engage the trigger
Is that right or is their a fault
I've checked and regressed the gearbox
Kev
Submitted: 2 years ago.
Category: Small Engine
Expert:  spankyjr1 replied 2 years ago.
Hi, my name is ***** *****'re having trouble today.I will do my best to assist you in resolving your issue.

Sorry for long delay.

No it should keep working until released,, it sounds like its tripping overload protection,, which would force you to release switch and start over.

I would also ohm out your power cord,, a internally fraed cord will cause high amp draw and trip overload protection and keep forcing restarts.
Replace cord if resistance is different from one wire to the others.

You would alos want to check for any loose connections internall in drill.

Please take a moment to rate my service so that I can get credit for my time.
The question will still remain open for follow up questions if needed.

Thanks
spanky

Related Small Engine Questions