How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask indy-tech Your Own Question
indy-tech
indy-tech, Import tech
Category: Toyota
Satisfied Customers: 7090
Experience:  Import technician .
29331485
Type Your Toyota Question Here...
indy-tech is online now

Changed immobiliser battery. Although fob light show its working,

Customer Question

Changed immobiliser battery. Although fob light show its working, the car does not respond. Can anyone help
Submitted: 3 years ago.
Category: Toyota
Expert:  Shantal-Mod replied 3 years ago.
Hello,

I've been working hard to find a Professional to assist you with your question, but sometimes finding the right Professional can take a little longer than expected.

I wonder whether you're ok with continuing to wait for an answer. If you are, please let me know and I will continue my search. If not, feel free to let me know and I will cancel this question for you.

Thank you,

Shantal
Expert:  indy-tech replied 3 years ago.
Name is Greg, My goal is to provide you with excellent service – if you feel you have gotten anything less, please reply back,

You may have to reprogram the key fob if the battery has been dead for to long reprogramming is needed..

Do this and then get back to me if needed.

1. Start with the key out of the ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Perform these steps within 5 seconds.
A. Insert the key into the ignition(Do NOT Turn) Pull key out.
B. Insert the key into the ignition(Do NOT Turn) Pull key out.

3. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Insert the key into the ignition(Do NOT Turn) Pull key out.

4. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Close the drivers door
D. Insert the key into ignition and leave it in ignition.
E. Turn the ignition to ON (Do NOT Start) then back to OFF.
F. Remove the key from the ignition.

5. Within 3 seconds, the power door locks should lock then unlock automatically
indicating successful entry into programming mode.
Return to step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds.
B. Immediately after letting go of the lock and unlock buttons,
Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door
locks should lock and then unlock once indicating successful programming. If
the door locks cycle twice, repeat steps A and B in step 6 as the remote was
not accepted.
C. Repeat steps A and B in step 6 for each new remote.

7. Open drivers door.

My goal is to provide you with excellent service – if you feel you have gotten anything less, please reply back with the reply box below and not the poor or bad service button ,
For further assistance there is no extra charge after accepting.

Rgds Greg

Related Toyota Questions