UK Auto Repair Questions?
Hopefully i can help..
Yes if they are really stuck fast in the head you need removal set which wont be cheap if your only going to use the once and have the right size adapter to screw on to the injector top itself and then fit a small puller to that to knock them up out the cylinder head.thats about the only way it can be done....these injectors arent really held by very much in the cylinder head at all - as its the fuel delivery crossovers over the top of the injector body "where that o ring seal between that is the most common fault on dti's" that holds them down - you'll have locating tad at the front of the injector body and just the lower gas/oil seal..some times you can pull them wiggle them a bit the injector from side to side usually can free it up to pull out..I do hope this helps..If you need to ask anything else or include anything further then just continue before you rate
Attachments are only available to registered users.Register Here
Attachments are only available to registered users.