How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rick Your Own Question
Rick
Rick, Camera and Video Technician
Category: Camera and Video
Satisfied Customers: 1709
Experience:  25+ years experience as a camera and video technician.
47133069
Type Your Camera and Video Question Here...
Rick is online now

Samsung D1070 Camera. No picture in view finder when taking

Resolved Question:

Samsung D1070 Camera. No picture in view finder when taking picture and picture when taken and viewed has problem with the colours.
Submitted: 2 years ago.
Category: Camera and Video
Expert:  Rick replied 2 years ago.
Hi. My name is*****’m a camera repair technician with over 20 years in the business and I'll be glad to help you with your question today.

If you are lucky, this is just a settings issue. If the camera has a "Review Time" setting, make sure it isn't set to off.

If this is a technical issue, it is possible to change the LCD without too much trouble, (but then I'm an experrienced tecn\hbician).You may want to check locally for a camera repair shop in your area, or, if you need assistance finding a shop, please let me know and I'll locate one for you.
Customer: replied 2 years ago.

Can't see a "review time" setting, after trying changes in settings a new set of pictures showed from card and now can not get old set of pictures from card. pressing trigger lightly get low light message and can not see an image. seems to be worse now think I need a shop!

Expert:  Rick replied 2 years ago.
I think you are right. It sonds like the diaphram is stiooing down way roo much. You can check it by setting the camera to manual or "A" for auto and setting the apertore wide open. Yhen look down throgh the lens to see if the diaphram is open or not.
Customer: replied 2 years ago.

Sorry, tried taking shot and is worse than before. Can you recommend a near shop?

Customer: replied 2 years ago.
Relist: Other.
did not seem applicable to my camera
Expert:  Rick replied 2 years ago.
Hi. This is Rick again.

The problem you are experiencing is a faulty CCD Image sensor. These can be replaced but it will take a technician to do so. I'll include a link below to a directory of repair shops, one of which should be in your area and able to help you.

http://www.acecam.com/uk-camera-repair.html

Rick and other Camera and Video Specialists are ready to help you