Hello, I've been working hard to find a Professional to assist you with your question, but sometimes finding the right Professional can take a little longer than expected.
I wonder whether you're ok with continuing to wait for an answer. If you are, please let me know and I will continue my search. If not, feel free to let me know and I will cancel this question for you.
I really would like an answer asap. I paid £13 for this service so I expect that. If I don't get an answer soon, then I will have to take this matter further. Nothing personal but I expect a service.
Hello BG, We will continue to look for a Professional to assist you.
Thank you for your patience,
Ok, Here is the report.
Control Module Diagnostic Trouble Code
CEM-6C46 Antenna/light ring internal fault
DDM-0005 Power window motor M+ or M- signal too low/signal missing
DDM-E003 Configuration fault Faulty configuration
DDM-0049 Control Module internal fault
ECM-530D DTC in transmission control module TCM faulty signal
PDM-E003 Configuration fault Faulty configuration
REM-1A03 Relay, extended X supply Signal too low
REM-8D11 High mounted stop lamp Faulty signal
REM-8D11 High mounted stop lamp Faulty Signal
SWM-E003 Configuration fault Faulty configuration
TCM-012B Neutral control No neutral control
his is what is on the diagnostic
This Iis the diagnostic report I had from volvo.I have know real sshifting problems at the moment only that it's slightly jerky when you set off in 1st from static. Off the traffic light s for example. Many tthanks, Ben
thank you for update it looks like you need software fixed and that can help your problem and don't need new gearbox it is possible you can need gearbox but those codes indicate and what you describe what you feel when you stop and wait and jerks that is software control for neutral control is bad and there is update at this point software problem go to Volvo dealer garage and tell them you like
tcm software re load do this first and than do
and you like called total can upgrade that helps most the problem
and also tell them to initialize windows with Volvo scanner