How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask furnaceguy2011 Your Own Question
furnaceguy2011, Hvac Tech
Category: Appliance
Satisfied Customers: 0
Experience:  I have been a hvac tech for ten years
Type Your Appliance Question Here...
furnaceguy2011 is online now

hi . I have a beko washer model wm6123w . it has stopped spinning

Customer Question

hi . I have a beko washer model wm6123w . it has stopped spinning and draining . taken kick board off and drained using pipe then checked filter . It had a 10p coin in it and a little lint/muck but not much . Still wont work on spin/drain . Any ideas please .
Submitted: 4 years ago.
Category: Appliance
Expert:  hvacguy17 replied 4 years ago.

It sounds like the belt has slipped off, or is broken. Here is a parts site that carries the belt. If this information has assisted you, please give me a great rating. Thank you


Customer: replied 4 years ago.
hello . no the belt is intact and in place
Expert:  furnaceguy2011 replied 4 years ago.
If the clothes are still wet, you may have a worn or loose belt (Maytag®), a worn clutch (GE®/Hotpoint®), or a worn motor pulley or tub bearing. Hope this helps
Customer: replied 4 years ago.
gave up waiting for reply and replaced the machine . worst £28 i even spent .
will not leave rating as their isnt one for stated the obvious or waste of time and money .. Will not use this service again