How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rob Your Own Question
Rob, Home Appliance Technician
Category: Appliance
Satisfied Customers: 6991
Experience:  20 yrs. experience with a major worldwide manufacturer.
Type Your Appliance Question Here...
Rob is online now

I have just taken delivery of a second hand static caravan

This answer was rated:

I have just taken delivery of a second hand static caravan fitted with a Bosch ClassiXX 120 Express washing machine ( WFO2466GB/07 ) The water, waste connections have been made and the machine plugged into the 240v supply. On trying to set any programme the display is showing a ' E:. ' and the machine does not start. The washer was working normally before the static caravan was transported
How do I clear this code and get the machine to function ?
Welcome, my name is XXXXX XXXXX I will be helping you with your problem today. If anything isn't clear, please just ask me.

Can you check to see if there is a number after the E?
The letter is indicating an error and the number indicates the fault.

When you start the cycle, does the door lock, or is it just closed? Is there any noise at all?

Customer: replied 4 years ago.

Hi Rob,

No number after the 'E' but in place of a number there are 3 red dots arranged as :- ; '


The door is closed firmly and clicks.


When a wash cycle is selected and switched on the red error code shows, there is no noise at all and the door can still be opened.

Hi Jeff

Unfortunately that is not a valid error code.

I suspect that in the move, the transit bolts were not fitted to the machine. This means the drum and concrete weight can move around inside the cabinet and this may have caused the problem.

Turn off the power and remove the lid.
Look carefully at the board/timer on the fascia. Look closely for any damage. Make sure all the wiring is connected and nothing is loose.
Also remove the rear panel and check the panels there and the motor connection

If you need more help, please just ask me.
In the meantime,

Can I ask you to take a moment and rate my response? Please use the smiley faces which you should now see. Please remember you are rating me personally, not the website or the problems you have had with this machine.
If you need to ask me anything after rating, please just follow the link in the welcome email

Rob and other Appliance Specialists are ready to help you