How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andrew Smith Your Own Question
Andrew Smith
Andrew Smith, Home Appliance Technician
Category: Appliance
Satisfied Customers: 3767
Experience:  Gas cooker specialist
Type Your Appliance Question Here...
Andrew Smith is online now

I have a glow worm ultra com hxi 24 and it keeps blowing the

2amp fuse on the PCB.
We... Show More
2amp fuse on the PCB.
We have put a new PCB in and it still doing the same any ideas
Submitted: 4 years ago.
Category: Appliance
Show Less
Ask Your Own Appliance Question
replied 4 years ago.

Andrew Smith : There are only a couple of things that can blow that fuse - the fan and the pump, are you able to isolate both and see if the fuse holds?
JACUSTOMER-vu39kqws- : The pump is in the loft and the boiler is in the kitchen.we have replaced the fuse twice now but it doesn't blow it straight away some times it can be days sometimes hours..
Andrew Smith :

This one is hard then if there is no specific point that the fuse fails.

Andrew Smith :

Are you able to monitor it and narrow it down to if the boiler is trying to restart?