How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Techdesk Your Own Question
Techdesk, Service Engineer
Category: Appliance
Satisfied Customers: 16409
Experience:  Whitegoods engineer working for a multibranded national company in the UK
Type Your Appliance Question Here...
Techdesk is online now

Deloghi cooker dtc90df The large ovan not working But the main

Customer Question

Deloghi cooker dtc90df The large ovan not working But the main element to grill is working is the oven worked by a Separate elemant
Submitted: 4 years ago.
Category: Appliance
Expert:  Techdesk replied 4 years ago.
When you try the oven, does the temperature light on the front come on?
Does the fan run (if it's a fan oven)?

Customer: replied 4 years ago.

The light comes on also the fan comes on

Expert:  Techdesk replied 4 years ago.
OK, thanks for that.

There's a circular element behind a panel and it's near certain it has failed and will need replacing.

Isolate the power to the appliance. Disconnect it from the electrical supply

As the temperature light comes on and there is no heat, it strongly suggests the element is at fault.

The method of changing will depend on the element fitted at the time of manufacture.

There are 2 types, one is held from the front by screws, the other is held from the rear by nuts.

If the interior light is on the rear panel, take the light glass off first.

Take the rear panel inside the oven out.

This will reveal the element and the fan.

Take the screws holding the element in place out.

Bring the element and the wiring into the oven cavity.

(Be careful not to pull the wires off as you manouvere the element into the cavity, if you do, you'll need to take the cooker out, rear panel off to be able to retrieve the wires. Don't try the machine if you have lost a wire, retrieve it first).

Swap the wiring on to the new element.
Fit the element in place and replace the cover.

Turn the power back on and set the clock.

Try the oven again.

If there are no screws holding the element in place, take the cooker out and take the rear cover off.

You can now access the wiring and the nuts holding the element in place.

If the element tests ok, let me know.

Obviously, if you cannot do this work yourself, you'll need to call someone in to do it for you.

Hope this helps
Let me know how it goes or if you need more help