How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Techdesk Your Own Question
Techdesk, Service Engineer
Category: Appliance
Satisfied Customers: 16409
Experience:  Whitegoods engineer working for a multibranded national company in the UK
Type Your Appliance Question Here...
Techdesk is online now

Belling cooker E641. Control panel. How do I remove red warning

This answer was rated:

Belling cooker E641. Control panel. How do I remove red warning light lenses to refit to a new panel?
The lenses have barbs on them.

Look on the inside of the panel, you have to press the barbs flat (without snapping them) and push the lens outward.

Have a look, let me know what you see.

Customer: replied 3 years ago.

They are not barbs but large flat pieces on each side of red lense on the inside of control panel

OK, if you don't want to call them barbs, they are pieces of plastic that spring open when you fit the lens.
You have to press them flat to the lens and push the lens outward.

Customer: replied 3 years ago.

You were quite correct.Many thanks for advice. Very fiddly to get them out!

But success at last.

I hope my payment to your company is just a one off. I don't need monthly sub.

Kind regards, XXXXX XXXXX Blair

Good job.

Glad you got it out.

To check on what you've signed up to, you need to contact customer services, I don't see anything to do with your account.

Good luck with the appliance.
I'd appreciate it if you could rate the answer/information I provided for the problem you had with the appliance.

Techdesk and other Appliance Specialists are ready to help you