How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Techdesk Your Own Question
Techdesk, Service Engineer
Category: Appliance
Satisfied Customers: 16409
Experience:  Whitegoods engineer working for a multibranded national company in the UK
Type Your Appliance Question Here...
Techdesk is online now
This answer was rated:

My Creda 49721 Main oven fan runs all the time after the oven

light blew and was replaced,the... Show More
light blew and was replaced,the only way to stop it is to switch off the main swich.The oven is still working.
Show Less
Ask Your Own Appliance Question
This suggests the selector switch has "welded" contacts.

The cure is to fit a new selector switch.

However, if you gain access to the switch, you can sometimes separate the contacts and get it working again.

Check the switch, see what you find and get back to me if you need more help.

Hope this helps