How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Michael Your Own Question
Michael, Customer Service
Category: Appliance
Satisfied Customers: 9568
Experience:  I have been an appliance repair tech for over 30 years and will help you solve your problems.
Type Your Appliance Question Here...
Michael is online now

I am trying to trace a set of door seals for a Norcool Coolmaster

This answer was rated:

I am trying to trace a set of door seals for a Norcool Coolmaster CU 200, is this item still available or is it no longer made
Hi may I have the full model #?
Also how old the unit is?
Thank you
Tech Michael
Customer: replied 3 years ago.

The model is a Norcool Coolmaster CU 200, the unit is 15 years old.

Hi thank you,
please contact this site for that part.
i will stick with you until you have this part and it is fixed but since this may take some time, if you will rate my service in a positive fashion thus far before you close this page, the system will allow me to schedule free follow ups with you and also ensure your question will NOT close or time out;-)
You will then be able to contact me at anytime at no additional cost until we have this fixed for you.

Thank you *****
Michael and other Appliance Specialists are ready to help you
Customer: replied 3 years ago.

Hi Michael, I tried the company you suggested but they want me to cut the existing seals and send a sample, if I did this the cool cccccupboard would be un usable as they also do not return the sample. They won't undertake to look at the seal as a whole or send it back to me.

They obviously send it to the actual seal manufacturer and act as a middleman.


Is there any other firms who offer a new seal service without all the run-around.


Denis Breslin

Hi Thats terrible.
I will check give a few days on this but i see if there is a better solution for you.