How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Michael Your Own Question
Michael, Customer Service
Category: Appliance
Satisfied Customers: 9568
Experience:  I have been an appliance repair tech for over 30 years and will help you solve your problems.
Type Your Appliance Question Here...
Michael is online now

Getting an E15 problem message and the tap sign is flashing

This answer was rated:

Getting an E15 problem message and the tap sign is flashing on the front. What do I do?


Hi Jessica, were there any water leaks or floods?
this sounds like its the anti flood switch which has been activated.
What you need to do for this is pull the machine out and tip it 45 degs backwards to drain the water from the base.
Or take off the inspection cover on the front at the bottom under the door. With this off use a sponge to soak the water up from the base.
Once the base is clear the antiflood will reset itself. Then retry the dishwasher and see how it goes from there.
Thank you Tech Michael
Michael and other Appliance Specialists are ready to help you
Customer: replied 3 years ago.

Thanks for your email, Michael. Tipping the dishwasher seems to have sorted the problem. I will check everything out when I use the dishwasher again this evening.