How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 17275
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
Type Your Appliance Question Here...
Daniel is online now

Hi have zanussi ZWF 14380G, bearings have gone how do i replace

This answer was rated:

Hi have zanussi ZWF 14380G, bearings have gone how do i replace them please


Sorry for the delay do you still need help on this?
If so can you post the product number please. It will be on a sticker on the inside of the door and will start with a 9.
But you need to prefix it with an A otherwise it will get crossed out.

Eg A912345678

Its just that theres 5 versions of this model number.

Customer: replied 3 years ago.

Hi yes still need help, product no is A914522676.


Ok thanks for that ive found the correct version now.

Not good news im afraid. On this model they use a welded drum so you cannot just replace the bearings. You can only replace the complete drum on this. A lot of manufactores are going this way as its cheaper for them to make them. They weld the drum together with the bearings and inner drum all incased. You cannot just replace bearings on this model im afraid sorry.

But to replace the drum you need to remove the front plastic control panel.
Then you can remove the front panel and you can access the drum from there.

Its only the older models that you need to remove the sides with the back panel. This is a wrap around cabinet so only the top and front comes off.

If you want the part number for the drum then this is it (###) ###-####but it wont be cheap as parts for these are quite expensive.

Sorry its not good news but if you need anymore info just get back to me.

Daniel and other Appliance Specialists are ready to help you
Customer: replied 3 years ago.

Hi Daniel T

Thanks for follow up , but do not need anymore help .

Have purchased new washer.

Phill Appleton


Hi Phil

No worries thats fine.