How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andrew Smith Your Own Question
Andrew Smith
Andrew Smith, Home Appliance Technician
Category: Appliance
Satisfied Customers: 3767
Experience:  Gas cooker specialist
Type Your Appliance Question Here...
Andrew Smith is online now

I presently have a Creda Europa Solar Plus build in oven where

This answer was rated:

I presently have a Creda Europa Solar Plus build in oven where part of the top element is presently not working. How do I remove the existing damaged element ? Does the oven have to be removed to get at the back or can the element be removed from the front in its existing position.
I am unable to read the serial or model number from the cooker but I do have A booklet detailed as N230E/ E 430E/ R 430E Installation & User Instructions which I presumes refers to my cooker.
Thanking you in anticipation.
Pat Dolan
E mail. *****@******.***. ( All lower case )
***** ***** :

Normally there are 2 screws or nuts to remove and the element simply slides out and the wires pull through the holes

***** ***** :

A top element usually has a clip or two underneath to stop it sagging too.

***** ***** :

The element reference number will be stamped on the rear fixing plate

***** ***** :

These parts can be ordered from many online spares retailers now

Customer: My apologies for not rating you yesterday as I was out of Hse all day yesterday. Excellant service.
Customer: Regards Pat
Andrew Smith and other Appliance Specialists are ready to help you