How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 17410
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
Type Your Appliance Question Here...
Daniel is online now

Hi,we have a Hoover optima wmh168D,the display on the control

This answer was rated:

Hi,we have a Hoover optima wmh168D,the display on the control board has developed an intermittant display fault,is this a common problem,will bying a control panel on e-bay for £25 fix this
thankyou for your Help

What fault is the display board giving?

Customer: replied 3 years ago.

the display does not appear and dissappears sometimes when in use


Ok from what you say yes its a fault on the display board.
But what you can try first is remove the top and look at the display board and disconnect the wiring block to it.
Then give the ends a gentel squess as this will make a better connection.
Do it on both ends as the other end will go to the main control board.

Then see if this makes a difference as sometimes it can. But if not then its going to be the display board at fault which they do fail on these as i have replaced a few over the years. Its not a common fault but they do fail.

Daniel and other Appliance Specialists are ready to help you