How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 17307
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
Type Your Appliance Question Here...
Daniel is online now

Sorry I meant E 35 was the fault code

This answer was rated:

Sorry I meant E 35 was the fault code

Is someone already helping you out with a question already?
As i dont see another question linked to you. It just the way you say sorry you ment E35 fault code.

Customer: replied 3 years ago.
No I thought that the question had no I originally not gone through
Ok thats fine, Can you post the model number please of the washer.

Customer: replied 3 years ago.
Logixx 8variioperfict

Ok E35 error code is a fault on the pressure side of the washer.

What you need to do is pull the washer out and lean it 45 degs backwards and see if water leaks out from the bottom.

If thats fine then remove the top and from there locate the pressure switch. It should be on the right and will be round with a few wires in there and a thin hose going to the bottom of it.
Pull this hose off and blow hard down it as this will clear the pressure chamber out.

Then refit the hose and retry the washer and see how it goes from there.

If its still sahowing the E35 then its either a faulty pressure switch or the control board im afraid.

Daniel and other Appliance Specialists are ready to help you