How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 17275
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
Type Your Appliance Question Here...
Daniel is online now

, I have a neff kitchen with an oven extractor hood D5852XOGB. One

This answer was rated:

I have a neff kitchen with an oven extractor hood D5852XOGB.
One of the locking pins for fixing the removable filter to the extractor has just broken.
How do I avoid buying an entire new extractor please?
Have you managed to get the filter down or is it still stuck up there?
Customer: replied 3 years ago.

I have it down but replacing it one pin seems broken now

That's great. Them locking tabs can be replaced quite easy as you can get a kit that comes as a pair so you can just replace just the locking tabs on there own which is a lot cheaper then a new hood.
Copy and paste the link below for the parts. They are push fit so one part goes on one side and the other on the other side and they just push into each other.
Daniel and other Appliance Specialists are ready to help you
Customer: replied 3 years ago.

Just what I hoped for.Order placed,hope it works.



No worries your very welcome.
With them fitted it will be as good as new :))