How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 17410
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your Appliance Question Here...
Daniel is online now

, I will be having a Zanussi induction hob installed in the

This answer was rated:

Hi, I will be having a Zanussi induction hob installed in the next day or two,
would you be able to confirm how much of a gap is ideal between the bottom
of the hob and the top of the electric oven fitted below it. Thanks in advance.

Hi

Is the hob being fitted in a standered kitchen?

Is there just a single oven under the hob and is the hob being fittted into worktop?

If so then it will be fine as ive never know a hob in a work top to be fitted to close to an oven as the units dont allow it to happen.

But all it needs is a gap of about 20mm to allow for the airflow and that will be just fine. So if its a standered kitchen then it will be fine. You just cannot sit the hob directly on top of the oven so a 20mm gap will be just fine.

Regards

Daniel and 2 other Appliance Specialists are ready to help you
Customer: replied 3 years ago.

Hi again,

Just to answer your questions:

Yes it will be a standard family kitchen

The induction hob will be built into the worktop

There will be a double oven sitting below

Thank you

Ok if you are having a double oven under there then it will be a built under oven so that will be fine as there will be plenty of space there so you will have no problem with that set up.

Regards

Daniel and 2 other Appliance Specialists are ready to help you