How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George-Allsorts Your Own Question
George-Allsorts, Senior Appliance Technicial Manager
Category: Appliance
Satisfied Customers: 1448
Experience:  A whitegoods technician with 30+ years service in Domestic Appliance Service & Repair, and General Mechanical & Electrical Repair
Type Your Appliance Question Here...
George-Allsorts is online now

Our Flavel FDW60 still heats the water on the rinse no heat

This answer was rated:

Our Flavel FDW60 still heats the water on the rinse no heat setting. Also after completing the wash it still carries on drying . The heater just keep switching on and off. Any sugestions ??
Thanking you in anticiapation
Hello, my name is George..

This is normally an indication that the heater relay on the pcb is stuck on... The heat is then being controlled by the thermostat

Please rate the assistance given & kindly be patient whilst awaiting any responses from me as I'm not constantly available.
George-Allsorts and other Appliance Specialists are ready to help you
Customer: replied 2 years ago.

This does this mean it needs a new pcb board and if so can I fix it myself .Am skilled computer engineer.

I would suggest first doing an earth leakage test on the element... Once that is checked and not found to have a leak, then either change the relay on the pcb or change the pcb...

If the heater has an earth leak, change the heater before changing the pcb.

Changing the pcb is an easy job that you can do yourself if you are competent