How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George-Allsorts Your Own Question
George-Allsorts, Senior Appliance Technicial Manager
Category: Appliance
Satisfied Customers: 1448
Experience:  A whitegoods technician with 30+ years service in Domestic Appliance Service & Repair, and General Mechanical & Electrical Repair
Type Your Appliance Question Here...
George-Allsorts is online now

I have an beko wmb71442w with the error code e 08 can you

This answer was rated:

hi I have an beko wmb71442w with the error code e 08 can you help me
Hello, my name is George..

Please tell me at what time during the wash do you get the E8 error?

Kindly be patient whilst awaiting any responses from me as I'm not constantly available.
Customer: replied 2 years ago.
The machine won't start, but you can spin it
Have you just installed the appliance Dave, or is it an appliance used regularly?
Customer: replied 2 years ago.
Used regularly
Ok Dave.. The E08 error is indicating that either the water is turned off or disconnected, the water inlet valve has become defective, or the PCB is defective..

Do you have a multimeter handy so we can do some tests?
Customer: replied 2 years ago.
How do I fix both of these and the water has not been turned off as water is still coming in
The next question is; if you turn the appliance to drain does it pump out the water?
Customer: replied 2 years ago.
The inlets working but no water is coming into the machine so I cannot pump it
When you say the inlet is working what do you mean?
Customer: replied 2 years ago.
There is water coming out the hose but no water is going into the machine
The water is coming out of the hose that is connected to the back of the appliance if you disconnect it .... Is that what you mean?
Customer: replied 2 years ago.
Then the water inlet is not working... The water inlet is the point that the hose connects to.. You will need to test the wiring to it to ascertain if power is being supplied to it.. If there is power then the problem is with the valve; If there is no power then the problem is with the pcb

I must now ask you to please rate the assistance given so far before I can assist you any further
George-Allsorts and other Appliance Specialists are ready to help you
Customer: replied 2 years ago.
Ok cheers
I am going to post a link to a page for you to print.. This is directions for the issue you have..

Do you have a printer?
Customer: replied 2 years ago.
No I don't have a printer
Customer: replied 2 years ago.
No I don't have a printer, don't worry about it, cheers ***** ***** help

OK.. I shall shall print the directions to a PDF file so that you can save it to your computer

Let me know when you have it saved

Customer: replied 2 years ago.
Saved it
Thank you Dave..

Let me know how you get on.

Let me know if you need replacement part numbers