How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 17294
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
Type Your Appliance Question Here...
Daniel is online now

Bosch Avanti xx8 spin dryer Fairly new and hardly used at

Customer Question

Bosch Avanti xx8 spin dryer
Fairly new and hardly used at all (in holiday home). Arrived to find it will not start. No lights come up on control board. Fuse in the plug is not the reason.
Can you help
Submitted: 2 years ago.
Category: Appliance
Expert:  Daniel replied 2 years ago.

If theres no lights comming on at all and the fuse is ok then its more then likely the control board on this.

But what you can try if you havent already is run it in another plug socket just incase its a faulty socket.

But if thats all ok then remove the top of the dryer and there you will see all the wiring going from the mains filter were the power cable goes to and the control board.

Check all the wiring blocks are fully pushed in there tight on all the connections.

Then leave the plug out of the socket for 30 mins and this will allow the control board to discharge itself.
Then plug it back in and see how it goes from there.

If still the same then its looking like the control board is the issue and will need to be replace to cure this im afraid.

If you need anymore info just get back to me.