How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dales-Electronic Your Own Question
Dales-Electronic, Home Appliance Technician
Category: Appliance
Satisfied Customers: 1466
Experience:  I am a Home Appliance / Refrigeration Technician of 25yrs+ with my own business and for multi-brand national companies.
Type Your Appliance Question Here...
Dales-Electronic is online now

My Kenwood Chef KM 300 has suddenly started operating at full

This answer was rated:

My Kenwood Chef KM 300 has suddenly started operating at full speed only - part way through bread making. Anything that can be done please?
Hello My name is Ian ~ I am not on the site constantly so please be patient whilst waiting for responses to you queries ~ almost sure to be the control module which controls the motor speeds including the pulse facility. Its available for about £30.
Dales-Electronic and other Appliance Specialists are ready to help you
Customer: replied 2 years ago.

Thank you. How do I go about getting this and is it simple to fit at home? If not, where might I go for help (Glastonbury, Som. area)? Yours, David XXXXX

Yes its fairly easy to fit, you will have to take the base off to check which one it is (there are two versions) and then you can get it from this company -- --

Customer: replied 2 years ago.
Thanks. Will have a look tomorrow and may come back to you. The web page suggests the part for the KM300, will see what I can find.

OK David that's fine, could you in the meantime rate the information given to you so that I can close the job down on the system, once done, you can come back to me later on a free of charge basis for any more information required ~ Ian

Customer: replied 2 years ago.

Thank you. Have had a good look from the bottom [no cover]. Power lead reluctant to come out without a lot of brute strength. Have removed small plastic cover underneath - electrics. But see no way of getting into the motor or getting more of the covers off. Think I should get it done by someone who knows how - is there someone who repairs Kenwoods in my area, please?

Look forward to hearing from you. David