How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George-Allsorts Your Own Question
George-Allsorts, Senior Appliance Technicial Manager
Category: Appliance
Satisfied Customers: 1448
Experience:  A whitegoods technician with 30+ years service in Domestic Appliance Service & Repair, and General Mechanical & Electrical Repair
Type Your Appliance Question Here...
George-Allsorts is online now

An integrated baumatic dishwasher. 2 years old. No warranty.

Customer Question

An integrated baumatic dishwasher. 2 years old. No warranty.
The alarm beeps 10 mins into the programme (tried two programmes).
Red light for the glass cycle is flashing.
Submitted: 2 years ago.
Category: Appliance
Customer: replied 2 years ago.
My email is ***@******.***
Expert:  George-Allsorts replied 2 years ago.
Hello, my name is George..
Please supply the model number of the appliance..
Just for you to note, we do not reply to your email address.. You will need to return here on JustAnswer for responses and questions.
Kindly be patient whilst awaiting any responses from me as I'm not constantly available.
Customer: replied 2 years ago.
I do not have the model number. All appliance manuals were taken /destroyed by the builder! Sorry!
Expert:  George-Allsorts replied 2 years ago.
As you open the door of the appliance, there should be a label attached to the outer edge.
The model number and other related information should be on that label.
Customer: replied 2 years ago.
Customer: replied 2 years ago.
BD 1632
Expert:  George-Allsorts replied 2 years ago.
The flashing RAPID (Glass) led is indicating that the heating system has picked-up a fault...
Here are a few pointers to follow... The likelyhood is that you need to replace the heating element, but test before replacing
The fault could be indicating any one of the following:
1. Check and if necessary replace the heating element;
2. Check and if necessary thermal safety device attached to the heater;
3. Check the wiring connections of the heater;
4. Check the wiring connections to the pcb;
5. Check the contacts of the heater relay on the pcb;
Please remember to rate the assistance given by me
Expert:  George-Allsorts replied 2 years ago.