How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Plumberpro Your Own Question
Plumberpro, Home Appliance Technician
Category: Appliance
Satisfied Customers: 634
Experience:  Heating and hot water heating appliances experienced
Type Your Appliance Question Here...
Plumberpro is online now

Tap was spitting out steam when not being used. I switched

This answer was rated:

tap was spitting out steam when not being used. I switched it of and i run water through to clear it . switched back on and we have no hot water know.
To reset the thermostat
to 96°C, turn the indicator one
notch to the right of vertical.
After adjusting, depress the tap
handle for 20 seconds for water
to re-heat to the new setting.
■ To adjust water temperature, turn
thermostat dial on the front of the tank
clockwise to increase temperature
or turn anticlockwise to decrease
temperature. Repeat if necessary.
All changes should be minimal.
Customer: replied 2 years ago.
There is still no hot water can not hear the heating element working
Hi , sounds like a faulty control board. Is it still in warranty?I can't find a service manual for it anywhere , so it may have to be an insinkerator service agent repair required , unfortunately
Plumberpro and other Appliance Specialists are ready to help you