How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George-Allsorts Your Own Question
George-Allsorts, Senior Appliance Technicial Manager
Category: Appliance
Satisfied Customers: 1448
Experience:  A whitegoods technician with 30+ years service in Domestic Appliance Service & Repair, and General Mechanical & Electrical Repair
Type Your Appliance Question Here...
George-Allsorts is online now

When changing ceramic glass on flavel milano e60 electic hob

This answer was rated:

when changing ceramic glass on flavel milano e60 electic hob i pulled 2 wires off the back 1white 1black
Hello, my name is George..
Please let me know the model number from inside the oven opening.
Kindly be patient whilst awaiting any responses from me as I'm not constantly available.
Customer: replied 2 years ago.
my model no is ML61CDS flavel milano e60
Here is the circuit diagram for your appliance
Flavel Milano ML61CDS Electric Ceramic Cooker
Please let me know if you need further assistance
George-Allsorts and 3 other Appliance Specialists are ready to help you
Customer: replied 2 years ago.
the diagram i am after is for the hob not the oven the 2 wires one comes from the centre of the block of4 indicator lamps which tell you which ceramic element is on white wire the other is a black or dark grey wire which comes from the hob elements looped to all 4 element thermal switches they have both been pulled off the ring control switches hope this makes it clear
Ok, let me see what I can find when I am back in work tomorrow.
Customer: replied 2 years ago.
sorry but i cannot rate the service untill i have had the answer
Customer: replied 2 years ago.
you keep sending drawings for the oven as i have said it is the HOB drawings that i am after the 2 wires that have been pulled off is related to the cluster of 4 hot plate warning indicators on the ceramic hob
Please look at the image below as an indicator of positions on the selectors in my discussion.
Selector Image
Please note that the selector numbers are 1, 2, 3, 4, from left to right on the appliance.
The white wire that you refer to goes to P1 of selector 2
The black wire that you refer to goes to P2 of selector 3
Customer: replied 2 years ago.
thank you that looks like what i want many thanks
You're very welcome