How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 17275
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
Type Your Appliance Question Here...
Daniel is online now

Zanussi zdc 68560w. Starts cycle, then stops after a couple

This answer was rated:

Zanussi zdc 68560w. Starts cycle, then stops after a couple of minutes

When it stops what does it show on the display?

Also lets see what the error code is.
Set it going on any cycle.
Then press and hold the start button and the button to the left of it.
Keep them both held in and after a few seconds the error code will come up E??

Let me know the code.

Customer: replied 2 years ago.

error code is E5H

Hi Thanks for that. Error code E5H means a motor inverter control board fault here. What you need to do is remove the top and the right hand side panel.From there you will see a smallish control board attched to the right hand side. This is the inverter board so check the wiring connection to there and make sure all the blocks are pushed on there tight.Also look at the motor at the bottom when the right side panel has been removed and do the same with the wiring on the motor as well. Then retry it and see how it goes from there. But if still the same then its more then likely the inverter control board on the right hand side thats going to be the issue here and would need to be replaced to cure it. Regards
Daniel and other Appliance Specialists are ready to help you