How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Plumberpro Your Own Question
Plumberpro, Home Appliance Technician
Category: Appliance
Satisfied Customers: 634
Experience:  Heating and hot water heating appliances experienced
Type Your Appliance Question Here...
Plumberpro is online now

Pressure on ecoTec plus boiler has dropped to 0 (error F.22)

This answer was rated:

Pressure on ecoTec plus boiler has dropped to 0 (error F.22) Can this be remedied by myself or do I need an engineer?
Hi, no you don't need an engineer. There will be a filling loop, usually on the pipes under the boiler. If you Google filling loop images you will see what to look for. There will be a tap on both or one end. Open the tap and fill up the boiler to about 1.2 bar, then reset the boiler. The pressure should come up on the boiler display as you are filling. If not press the I button
Plumberpro and other Appliance Specialists are ready to help you