How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 17275
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
Type Your Appliance Question Here...
Daniel is online now

The 5 button panel on my nextra optima washing machine

This answer was rated:

Hello The 5 button panel on my nextra optima washing machine has been pushed into the machine, can I get at it from the front (does the front panel come off) or do I need to pull the machine out and go in from the rear. Tom Topping
Im afraid the washer has to be pulled out as you need to remove the top panel of the washer to access this.
Pull the washer out and look at the back of the top of the washer and there will be 3 screws holding the trim on.
Remove them and then you can slide the top panel out from the back.
Once that's off you can then access the frame behind the panel and refit it from there as once the top is off you can refit the board from there without removing the front panel.
If you need anymore info just get back to me.
Daniel and other Appliance Specialists are ready to help you
Customer: replied 2 years ago.
Job Done. Thanks
Nice one, Thanks for letting me know how it went.