How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 17410
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
Type Your Appliance Question Here...
Daniel is online now

During washing cycle 3 at the spin stage the machine stopped

This answer was rated:

during washing cycle 3 at the spin stage the machine stopped with all the indicator lights
flashing and an error code F13 was displayed?
Hi If you are getting F13 flashing during the wash cycle then its either the dryer sensor itself faulty, The wiring to the sensor or the control board. What you need to do is pull the washer out and remove the top panel.There on top you will see the metal dryer chamber.Towards the front either on the right hand side or on the centre you will see the dryer sensor. It will have 2 thin wires going to it. Check the wires and make sure none have broken from the block. If so then you need to repair the wiring.If they are fine then you need a multi meter and test the sensor. It should give a reading of around 20K ohms. If faulty it will need to be replaced. But if the wires and the sensor itself are all fine then you are left with the main control board at the back at the bottom at fault here. But check the sensor and wires and see what you find as most of the time for this fault its one of them at fault here. Regards
Hi See the question is still open here. Do you need anymore information on this? If not then to close the question you just need to rate the answer I gave by clicking the star ratings at the top of the page. Many thanks
Daniel and other Appliance Specialists are ready to help you