How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 17291
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
Type Your Appliance Question Here...
Daniel is online now

CREDA SIMPLICITY t622 cw replace the belt

Customer Question

CREDA SIMPLICITY t622 cw replace the belt
Submitted: 1 year ago.
Category: Appliance
Expert:  Daniel replied 1 year ago.


How have you done this?

Is the front still attached and have you got the right hand side panel remove?


Customer: replied 1 year ago.
front panel stil attached r/h panel removed
Customer: replied 1 year ago.
Expert:  Daniel replied 1 year ago.

Ok if you have the belt round the drum refit the front panel of the dryer and leave the right hand side panel off. This will place the drum in the correct place from there.

Now i dont know if you have remove the fans yet but if not then look at the right hand side and there at the bottom to the right of the motor you will see a plastic cover.

Remove this cover and there you will see the fan. Remove the fan and then you can slide the belt onto motor shaft and then you can feed it inbetween the pulley wheels. Its sits like a V shape inbetween the 2 pulley wheels.

Then you can refit the fan and fan covers from there.

Try that and let me know how it goes.

Expert:  Daniel replied 1 year ago.


Just wondering how you got on with the dryer as i havent heard back from you.

Did you managed to sort it?