How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rob Your Own Question
Rob, Home Appliance Technician
Category: Appliance
Satisfied Customers: 420
Experience:  20 yrs. experience with a major worldwide manufacturer.
Type Your Appliance Question Here...
Rob is online now

When going into rinse cycle drum wont spin first light

Customer Question

When going into rinse cycle drum wont spin first light flashes on rinse cycle then the rest goes through the light board to end the cycle
Was washing a heavy load ie towels sounded as if the load was not even when went into the spin mode the machine went off with a loud thud then stopped because it didnt want to spin then rinse cycle light continues to flash
Submitted: 1 year ago.
Category: Appliance
Expert:  George-Allsorts replied 1 year ago.

Try again... If you get a response from the appliance then all well and good, however if not, by the sounds of your description the fuse may have gone on the control board

Customer: replied 1 year ago.
Have tried the machine more than once not the fuse board as lights are doing the same thing have emptied the wash out of the machine tomake the drum lighter so i dont think this is the result i was looking for what othef options do you have
Expert:  George-Allsorts replied 1 year ago.

It is quite possibly the fuse on the motor control board, however, if you disagree, then I will opt out to allow you to get the advice of someone else.

This would be more evident when the tub wont rotate during the wash

Customer: replied 1 year ago.
Ok thanks for that hubby wasnt aware there was a fuse on the control board he has to go to work now until this evening but will give it a look on his return