How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Michael Your Own Question
Michael, Customer Service
Category: Appliance
Satisfied Customers: 9568
Experience:  I have been an appliance repair tech for over 30 years and will help you solve your problems.
Type Your Appliance Question Here...
Michael is online now

My Bosch Wft2608gb stops at "Final Rinse" with a time of 4

This answer was rated:

My Bosch Wft2608gb stops at "Final Rinse" with a time of 4 min.s showing then nothing unless m/c turned off at wall & spin or other program selected & turned on
What is the cause please?

Hi Im sorry to hear that. How old is your washer?

Thank you

Tech Michael

Customer: replied 1 year ago.
I am not certain but definately pre 2010 & may be 5 years before that as the hot water element was replaced in March 2010

Thank you for that information.

Unfortunately this one needs a new control board. There is no soldering required and it basically just plugs in.

I will help you if you need me then.

If you are a little handy, you can do this.

The best place to get the part is:

I would call them to place this order, they will then ship it out today or tomorrow;-)

Call : 0844(###) ###-####/p>

In any case, I will stick with you until this is complete.

Please rate my service kindly.

Also it is the only way I am credited for my time and expertise with you.

Once you rate, I will be notified and will add your question to my priority list so you can reach me anytime until this problem is solved.

Then you can reach me by simply replying to this message anytime.

Thank you


Tech Michael

Michael and other Appliance Specialists are ready to help you